• On sale!

PadXpress -Nautic Duo Regenerating Gelcoat (PB800) + Ceramic Protection (PB550)+Plate Ø125mm(PC505) (PBPACK855)

PadXpress -Nautic Duo Regenerating Gelcoat (PB800) + Ceramic Protection (PB550)+Plate Ø125mm(PC505) (PBPACK855)

€99.99
Tax included Sent to 48h
  • Special regenerating polish for gelcoat shells.
  • Restores shine and depth to your gelcoat shell.
  • Eliminates scratches and marks on your shell.
  • Removes all traces of stickers and license plates.
  • The regenerating polish is directly integrated into the 125 mm diameter polishing foam.
  • The Gelcoat Regenerating Polish Pad is valid for a boat of 7 to 9 metres (in normal use).
  • AND
  • Protective film made of ceramic nanoparticles - High impact resistance.
  • Fixes the colours, brings brightness and shine.
  • Water repellent and anti-fouling effect.
  • Ceramic protection valid for 2 boats of 7 to 9 metres (50m²).
  • Eco-Friendly. Water base.
  • ET
  • 1 x 125 mm tray included

Quantity
In Stock

Why use PadXpress Gelcoat Regenerator?

Over time, boat hulls oxidise and lose their shine and gloss, giving the impression of a boat in poor condition. PadXpress Special Gelcoat Hull Polish is a powerful, non-abrasive regenerator that effortlessly restores your boat's hull. Its deoxidising qualities make it the ideal solution to bring your gelcoat hull back to life, thanks in particular to its ease of use without prior sanding and its power to eliminate appearance defects. For a long-lasting shine, apply PadXpress Nautic Ceramic Protection (PB550). Your boat will regain its shine in record time (4 hours for a 7 metre boat). No more endless hours of stripping, sanding and repainting your boat.

Prerequisites

Your hull must be clean and dry If your hull has been previously treated / washed with acids, we advise you to lightly sand with "2000 or 3000 grain" paper before starting the PadXpress Nautic treatment. Acid can cause a deterioration of the colour enhancement. Make sure that your polisher's plate is Ø125 mm in diameter.

Instructions for use

  • Position the foam applicator on the polisher and select a maximum working speed of 1500 rpm.
  • Place the foam on the part of the hull to be polished.
  • Apply vertical pressure to the foam (dry flick of the wrist) to release the product from the tank
  • Work with regular criss-cross strokes, maintaining light pressure on the foam for good contact on the substrate, but without forcing.
  • Work in areas of approximately 1m². Once this area has been treated, use your microfiber to wipe the excess off the hull.
  • Repeat the operation as many times as necessary, depending on the surface to be treated.
  • Once the renovation is finished, it is strongly recommended to apply a protector/fixer (type PadXpress ceramic protection ref. PB550).
  • One PadXpress Nautic Regenerating Gelcoat foam is suitable for treating 1 boat of 7 to 9 metres.

Why use PadXpress Special Boat Ceramic Treatment?

Avec le temps la coque des bateaux s’oxyde et perd de son éclat et de sa brillance, et donne l’impression d’un bateau en mauvais état. After applying one of the PadXpress Nautic regenerators: Special Painted Hull (PB500) or Special Gelcoat Hull (PB800), to effortlessly renovate the hull of your boat, it is strongly recommended to use the Ceramic Protection. Ce film de protection composé de nanoparticules de silicium va venir protéger votre coque de façon durable. Il apporte un éclat et une brillance supplémentaire (environ 30% en plus) ainsi qu’un film de protection longue durée face aux impacts, coups, projections et amplitudes thermiques que subissent votre coque. Il est anti-adhérent, résiste aux impacts (accostage, marques de pare-battages) et produit un véritable effet déperlant.

Prerequisites

The ceramic protective film is applied to a deoxidised surface, preferably without holograms. We recommend using PadXpress Nautic's Paint Regenerator (ref. PB500) or Gelcoat Regenerator (ref.PB800)

Instructions for use

  • Position the foam applicator on the polisher and select a maximum working speed of 1200 rpm.
  • Place the foam on the part of the hull to be polished.
  • Apply vertical pressure on the foam (dry flick of the wrist) to release the product from the tank.
  • Work with regular criss-cross strokes, maintaining light pressure on the foam for good contact on the substrate, but without forcing.
  • Work in areas of approximately 1m². Once this area has been treated, use your microfiber to wipe the excess off the hull.
  • Repeat the operation as many times as necessary, depending on the surface to be treated.
  • Once the ceramic protector has been applied, allow to dry for approximately 30 minutes and then polish with a cotton or micro-fibre cloth. For an optimum result and a longer duration of protection, a second application of the ceramic protector can be carried out.
  • One PadXpress Nautic Ceramic Protection foam is suitable for treating 2 boats of 7 to 9 metres (approximately 50m²)

Precautions for use

  • It is preferable to protect clothing and use gloves when applying.
  • Do not swallow, avoid contact with eyes.
  • Do not dispose of product residues down the drain.
  • Dispose of the applicator foam at an authorised collection point.
  • Do not use the foam applicator for any purpose other than that for which it is intended.
  • Keep out of reach of children.
PBPACK855
892 Items