Anti-Hologram body treatment

Padxpress Car - Anti-Hologram body treatment - Ø125mm - (PC540)

Padxpress Car - Anti-Hologram body treatment - Ø125mm - (PC540)

€69.90
Tax included Sent to 48h
  • Removes holograms (circular micro-scratches) from your paint
  • High-finish shine
  • Body treatment for 2 cars
  • 4 times faster than a traditional technique
  • Easy to use and without projection
  • The paint polish is directly integrated into the polishing foam.
  • One push against the surface to be treated and the product is released
  • Eco-Friendly
  • Approved and certified action
Quantity
En stock

Why use PadXpress Anti-Hologram Body Treatment on your car?

Hand washing, rolling and road spray create holograms ("circular micro-scratches" or "spider webs") on your car's body and give the impression of a car with paint defects or poor maintenance. The anti-hologram treatment developed by PadXpress allows you to eliminate all these defects, ensures a perfect shine and gives back to your vehicle the shine of a new paint from the first passage.

Whether you are a private individual or a professional, you will appreciate the disconcerting ease with which you will apply it. Its unique device (PadXpress) is in the form of a foam in which a product tank is integrated. A simple pressure and you release the anti-hologram treatment. Thanks to its velvet clip, the Pad can be attached to all polishing machine plates.

Prerequisites

- Your bodywork must be clean and dry

- Shake the product well before use.

- Make sure that your polisher plate is Ø 125mm

Instructions for use
1- Place the foam applicator on the polisher
2- Place the foam on the part of the body or the fairing to be polished,
3- Apply a vertical pressure on the foam (dry wrist stroke) to make the product come out of its tank
4- Work with regular crossed movements (from left to right and from top to bottom). For your car, select a speed of 1500 rpm, maintaining a light pressure on the foam for a good contact on the support, but without forcing.
5- Work in areas of about 1m². Once this area has been treated, use your micro-fiber to wipe off the excess on the bodywork.
6- Repeat the operation as many times as necessary, depending on the surface to be treated.
7- Once the anti-hologram treatment is finished, it is strongly recommended to apply the Ceramic Protection (ref. PC550) or one of the Titanium treatments (ref. PC510 / PC520) from PadXpress.

One PadXpress Anti-Hologram Treatment foam is indicated to treat 2 cars

PC 540
979 Items

Data sheet

Brand
PadXpress
Name of product
Anti-Hologram body treatment
Product type
Anti-hologram Polish treatment
Product reference
PC540
Utilisation
All types of painted bodywork
Benefits and gains
Removes holograms (circular micro-scratches) from your bodywork and hulls. High-finish shine.
Applicable to
For 2 cars
Pad diameter
125 mm
Weight
230 grams
Duration and conservation of products
Store foam in its box, in a dry place (maximum temperature 25°C) and away from light. To be used within 12 months of opening
Type of packaging
Carton
Item(s) included in the box
1 Pad diameter 125 mm with integrated tank
Adapter plate Ø125mm for polisher (Ref. PC505)
NOT SUPPLIED - May be purchased at extra charge. Available on site: "Adapter tray 125 mm diameter for polishing machine (Ref. PC505)
ISBN
3760299740212
Equipment(s) required
Rotary polisher (incompatible with orbital polishers)

You might also like