Why use PadXpress Special Boat Ceramic Treatment?
Say goodbye to the dullness of your boat's hull with PadXpress' Special Boat Ceramic Treatment! When your hull loses its shine over time, it's time to give it a new look. After using one of PadXpress Nautic's regenerators to effortlessly renew your hull, Ceramic Protection is your next step. This revolutionary protective film, made of silicon nanoparticles, provides an extra shine and luster (about 30% more) while protecting your hull from impacts, blows, splashes and thermal variations. In addition to being non-stick, it resists docking and fender marks, while creating a water repellent effect.
Prepare your hull using PadXpress Nautic's Paint Regenerator or Gelcoat Regenerator, then give it the finishing touch with Ceramic Protection. Restore your boat to its former glory and get ready to sail with style and confidence!
Prerequisites
The ceramic protective film is applied to a deoxidised surface, preferably without holograms. We recommend using PadXpress Nautic's Paint Regenerator (ref. PB500) or Gelcoat Regenerator (ref.PB800)
Instructions for use
- Position the foam applicator on the polisher and select a maximum working speed of 1200 rpm.
- Place the foam on the part of the hull to be polished.
- Apply vertical pressure on the foam (dry flick of the wrist) to release the product from the tank.
- Work with regular criss-cross strokes, maintaining light pressure on the foam for good contact on the substrate, but without forcing.
- Work in areas of approximately 1m². Once this area has been treated, use your microfiber to wipe the excess off the hull.
- Repeat the operation as many times as necessary, depending on the surface to be treated.
- Once the ceramic protector has been applied, allow to dry for approximately 30 minutes and then polish with a cotton or micro-fibre cloth. For an optimum result and a longer duration of protection, a second application of the ceramic protector can be carried out.
- One PadXpress Nautic Ceramic Protection foam is suitable for treating 2 boats of 7 to 9 metres (approximately 50m²)
Precautions for use
- It is preferable to protect clothing and use gloves when applying.
- Do not swallow, avoid contact with eyes.
- Do not dispose of product residues down the drain.
- Dispose of the applicator foam at an authorised collection point.
- Do not use the foam applicator for any purpose other than that for which it is intended.
- Keep out of reach of children.